Idotpc.com: The Home And Official Site Of Patented Half-U Mini-ITX Products Since Year 2001 - iDOTpc.com

The cart is empty.
Cart contains {{shoppingcart.totalQuantity}} Item(s) Total: {{shoppingcart.subtotal}} {{shoppingcart.total}}
Call UsQuestions? Call us at (510)475-7868 Register or LoginRegister or Login CheckoutCheckout Contact UsContact Us HomeHome

Browse by Category

Hard to Find Items

Page 1 of 2  -  1 2  Show All
Sort by:
Price $1.00
In Stock
AW-01 Adapter Wire is special designed to convert the standard 2.54mm pitch pin connector to a mini 2.0mm plug. Mini 2.0mm pitch pin-header is widely used in many Mini-ITX motherboards now. It'll be more flexible and save to use this wire adapter instead of a PCB module.
Price $1.00
In Stock
AW-02 Adapter Wire is special designed to convert the standard 4pin male floppy power connector to a 2.54mm pitch 2pin plug. It adapt 5V DC from regular power supply to any mini device that uses 5V DC power.
Price $15.00
in stock
Convert a slimline SATA DVD+/-RW drive with a 13pin SATA Data/Power connector (mount on the drive) to 4 pin USB 2.0 connector (plug to the internal USB pin header on motherboard).
CD-USATA adapter is the perfect solution for Mini-ITX system!
Especially when you are running out the SATA port (such as configure with Intel Atom motherboard) or simply don’t want the messy wiring block out the air ventilation from the mini case.
Price $18.00
List Price: $29.00
You Save: $11.00 (38%)
in stock!

This CF-USB20 CompactFlash Card Reader to USB Adapter is the only internal card reader with fast USB 2.0 interface.
It enables the industrial computer to embed a surface load, hot swappable CF card reader; allow the running server to transfer CF data fast and easy without shut down the system!
Price $3.00
In Stock
CW-02 Power Cable with standard DC Jack. A very helpful accessory when using M2-ATX series Car DC Converter off the car battery. It'll allow the DC board to accept a regular 12V/19V power adapter for bench testing or other purpose.
Price $3.00
In Stock
CW-03 Power Cable with standard DC Jack. A very helpful accessory when using M2 or M4 series Car DC Converter off the car battery. It'll allow the DC board to accept a regular 12V/19V power adapter for bench testing or other purpose.
Price $15.00
List Price: $19.00
You Save: $4.00 (21%)
available
SATA and IDE Adapter, Converts either your SATA hard disk drive to IDE or IDE drive to SATA.
Price $8.00
List Price: $9.00
You Save: $1.00 (11%)
in Stock
RS-1U1-I , 1U height, 1 slot PCI Riser Card; The PCI slots face inward and on top of the motherboard when plug in.
Price $8.00
Temporally Out of Stock
RS-1U1-O, 1U height, 1 slot PCI Riser Card; The PCI slots face Outward from the motherboard when plug in.
Price $18.00
List Price: $19.00
You Save: $1.00 (5%)
in stock
RS-2U1E PCI Express X16 Riser Card fits in all 2U-height case and plugs directly to a motherboard.
Accept a PCI-e card facing toward and raise it up 2" above the top of motherboard's PCIe slot to avoid conflict with onboard components.
Price $18.00
List Price: $25.00
You Save: $7.00 (28%)
In Stock
RS-2U2 2U height 1 to 2 slots PCI Extention Riser Card.
The PCI slots face inward and PCI add on card place on top of the motherboard.
Price $20.00
In Stock
RS-2U1E PCI Express X16 lower slot riser card fits in all 2U-height case and plugs directly to a motherboard.
Accept a PCI-e card facing toward and raise it up 2" above the top of motherboard's PCIe slot to avoid conflict with onboard components.
Page 1 of 2  -  1 2  Show All
iDOTpc.com - 30995 Huntwood Ave #301, Hayward, CA 94544, US