CF-IDE40 CompactFlash Card Reader to 40pin IDE Adapter

The cart is empty.
Cart contains {{shoppingcart.totalQuantity}} Item(s) Total: {{shoppingcart.subtotal}} {{shoppingcart.total}}
Call UsQuestions? Call us at (510)475-7868 Register or LoginRegister or Login CheckoutCheckout Contact UsContact Us HomeHome

Browse by Category

Recently Viewed...

CF-IDE40 CompactFlash Card Reader to 40pin IDE Adapter

CF-IDE40 CompactFlash Card Reader to 40pin IDE Adapter
CF-IDE40 CompactFlash Card Reader to 40pin IDE Adapter
CF-IDE40 CompactFlash Card Reader to 40pin IDE Adapter
CF-IDE40 CompactFlash Card Reader to 40pin IDE Adapter
CF-IDE40 CompactFlash Card Reader to 40pin IDE Adapter
CF-IDE40 CompactFlash Card Reader to 40pin IDE Adapter
CF-IDE40 CompactFlash Card Reader to 40pin IDE Adapter
CF-IDE40 CompactFlash Card Reader to 40pin IDE Adapter
(Click to see larger image and other views)
Quantity
Save View quantity discount details
200 To 500 Units
10%
SKU: 16800088
Weight: 0 lbs 8 ozs
CF-IDE40 CompactFlash Card Reader to 40pin IDE Adapter
Price: $10.00
Product Details
This adapter can replace a hard disk drive. Once the system starts with this adapter and a CF card attached, the CF card appears to the system as a IDE disk drives. Unlike other flash storage systems, such as disk-on-chip modules, this solution does not require device driver or additional software to run the unit. CF card can be the primary boot device containing the OS and application or a secondary storage.

  • Accord with: CF Ver2.0 and IDE/ATA-33 spec.
  • True IDE mode, support DMA-33 transfer mode
  • Replacement for hard disk drive, no device driver required
  • One onboard CF card reader
  • One 40pin male IDE connector
  • Uses a floppy power connector
  • 2 onboard LEDs for power on and activation indicator 
  • Bootable and supports CF card (Type I & II) or a IBM Microdrive
  • Jumper configuration: master/slave
  • Not recommended for high vibration environments
  • Dimensions: 2.4" x 1.8"
Note: This CF reader is not hot-swappable since it is an IDE device. A CF card must be installed in the CF reader before the computer is booted up. If a CF card is inserted in the CF reader after the computer started, the computer will not recognize the CF card and the computer will need to be re-started.
iDOTpc.com - 30995 Huntwood Ave #301, Hayward, CA 94544, US